Heat Transfer Equipment

When temperature required for steam is 150° C, the corresponding pressure required for steam heating becomes too high for economical design of process equipment. For example, at 300° C temperature, pressure requirements would be approximately 90 kgs.cm2, i.e. 1280 PSI. Such pressure requires costly equipment, boilers and pipings and other safety provisions including qualified boiler attendants.

“Warm Stream” make Flowtherm is a state-of-the-art, fully automatic, 3-pass, gas-fired packaged Thermic Fluid Heater engineered to provide efficient process heat up to 300ºC at near atmospheric pressure. Here's what sets Flowtherm apart:

✅ Exceptional Thermal Efficiency: With its innovative design, Flowtherm achieves thermal efficiency levels as high as 88%, ensuring maximum energy utilization and cost-effectiveness.

✅ Advantages Over Steam Heating: Unlike steam heating systems, which often require high pressure and are prone to corrosion and scaling, Flowtherm offers a more economical and corrosion-resistant solution. It eliminates the need for costly equipment and boiler attendants, reducing operational expenses.

✅ Precise Temperature Control: Flowtherm's Thermic Fluid Heating System allows for precise temperature control, ensuring consistent performance and optimal operating conditions for your processes.

✅ Compliance and Convenience: Flowtherm falls outside the purview of the Indian Boiler Regulation Act, eliminating the need for statutory inspections and costly annual shutdowns. Its fully automatic operation further streamlines maintenance and operation, saving time and resources.

✅ Automated Control and Safety Features: Equipped with advanced automation features, including automatic temperature and combustion control, Flowtherm ensures safe and reliable operation. The burner's ON-OFF or modulating type, along with automatic ignition and flame failure sensing, safeguard the combustion process.

✅ Efficient Combustion Loop: Flowtherm's combustion loop features a highly efficient, adjustable high-pressure solid injection type burner, designed for maximum combustion efficiency. The burner head's specially designed configuration facilitates thorough mixing of atomized fuel oil and air, enhancing combustion efficiency and thermal performance.

✅ Innovative Gas Loop Design: The gas loop of Flowtherm optimizes heat recovery by utilizing waste heat from the boiler shell, contributing to better combustion and higher thermal efficiency.

✅ Reliable Thermic Fluid System: Flowtherm's Thermic Fluid System consists of high-temperature IBR approved carbon steel boiler tubes, a deaerator tank, expansion tank, and insulated pipe grid. The system efficiently circulates thermic fluid through heating coils, delivering heat to user equipment while maintaining consistent performance and reliability.

Experience the efficiency, reliability, and convenience of Flowtherm for your process heating needs. Invest in Warm Stream make Flowtherm today for superior performance and peace of mind.

We supply high-quality Steam Boilers, which are manufactured using top-grade steel and have a thermal efficiency of 90-95%. We promise to deliver the orders within the postulated time frame as we are backed by excellent logistics facility. We have our own storage unit wherein we keep a large stock for meeting urgent and massive requirements of the clients. Laced with modern amenities, this unit keeps the lot free from the damaging factors.

Warm Stream's "VENTITHERM" direct and indirect type Hot Air Generators are fully automatic and run on on gas and oil. The ideal source of obtaining hot process air for Dryers, Ovens, Spray Dryers and other similar applications.

Indirect fired have temperature limitation upto 400° C. Indirect fired Hot air generators do not have any refractory and all internal parts like combustion chambers, heat exchangers are highly reliable with low thermal inertia and have virtually no maintenance. They offer 83% ± 2% efficiency (based on NCV) and are simple to operate. The capacity ranges between 50,000 Kcal/hr. to 25,00,000 Kcal/hr.

Direct Fired 'VENTITHERM', for the applications where contamination by carbon particles or combustion products do not matter for the product to be dried or baked, and higher temperature upto 100°.

Indirect fired 'VENTITHERM', for the applications where clean hot air is required for the drying as in Food processing, Paint backing or for some fine chemicals.

Wood and Coal fired models are also available for more economy.

Warm Stream's "Aquaflowtherm" series LDO/HSD, FO, or Gas Fired Hot Water Generators offer a reliable and efficient solution for supplying process heat through hot water media, with a temperature range of up to 90°C. Here's why they are the ideal choice for a wide range of industries:

✅ Fully Automatic Operation: Aquaflowtherm hot water generators are designed for hassle-free operation. They feature fully automatic controls, making them easy to operate and maintain, saving time and effort for operators.

✅ Versatile Application: These hot water generators are suitable for various industries, including Steel Plants, Hotels, Hostels, Food Processing, Textile Industries, Rubber Industries, and more. Wherever hot water is required for processes, Aquaflowtherm provides a reliable source of heat.

✅ High Efficiency: With an efficiency rating of 90% ± 2% (based on NCV), Aquaflowtherm hot water generators ensure optimal energy utilization, reducing fuel consumption and operating costs.

✅ Wide Capacity Range: Aquaflowtherm hot water generators are available in a wide capacity range, from 50,000 Kcal/hr. to 25,00,000 Kcal/hr., ensuring scalability to meet the specific requirements of different applications.

✅ Fuel Options: These hot water generators offer flexibility in fuel options, including Light Diesel Oil (LDO), High-Speed Diesel (HSD), Furnace Oil (FO), and Gas. Additionally, Wood, Agro Waste, and Coal fired models are available for economical operation, catering to diverse fuel preferences and cost considerations.

✅ Reliable Performance: Built with quality materials and advanced technology, Aquaflowtherm hot water generators deliver consistent and reliable performance, meeting the demanding requirements of industrial processes.

Whether you need hot water for heating, cleaning, or other industrial applications, Aquaflowtherm hot water generators provide the perfect solution with their efficiency, reliability, and versatility. Choose Aquaflowtherm for your process heating needs and experience superior performance and cost savings.

After-sales service is a crucial aspect of ensuring customer satisfaction and maintaining long-term relationships. Here's how Warm Stream can enhance its after-sales service for the Aquaflowtherm series hot water generators:

✅ Prompt Response: Ensure prompt response to customer inquiries and service requests. Establish clear communication channels, including phone, email, and online support portals, to address customer concerns in a timely manner.

✅ Technical Support: Provide comprehensive technical support to assist customers with installation, operation, and troubleshooting of hot water generators. Offer on-site assistance when needed and maintain a team of skilled technicians to handle service calls efficiently.

✅ Spare Parts Availability: Maintain an inventory of spare parts and components to facilitate quick repairs and replacements. Ensure availability of critical parts to minimize downtime and keep customers' operations running smoothly.

✅ Customer Feedback and Satisfaction Surveys: Regularly solicit feedback from customers to gauge their satisfaction with the after-sales service experience. Use customer feedback to identify areas for improvement and implement corrective actions to enhance service quality.

✅ Continuous Improvement: Continuously evaluate and improve after-sales service processes based on customer feedback and industry best practices. Stay proactive in identifying emerging trends, technologies, and customer needs to stay ahead of the competition.

By prioritizing after-sales service excellence, Warm Stream can not only meet but exceed customer expectations, fostering loyalty and trust among its customer base. This, in turn, can lead to repeat business, positive word-of-mouth referrals, and sustained growth in the market.